- Postcode district
- SM4
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £6,595 inc VAT
- Nearby
- Mitcham, Wimbledon, Tooting
- Building rules
- England
Is an external pocket sliding door a good fit for your home in Morden?
Here is what to weigh up if you are considering external pocket sliding doors for a home in Morden:
If the wall beside your Morden patio opening is free of windows, radiators and sockets, it may be long enough to take a pocket so the panels disappear completely.
Want the whole width of your Morden kitchen open to the garden but prefer the look of sliders to bifolds? A pocket gives you both, at the cost of more building work.
- Open panels are hidden inside the wall rather than stacked in view, keeping the opening clean-lined compared with a bifold stack at one side.
- Parked inside the wall, open panels are protected from weather and knocks, and garden furniture can sit right up to the edge of the opening.
- Pockets can be formed on one side or both, so a wide opening can part in the middle with panels sliding away in each direction.
Daylight in Morden and what it means for your glass
In Morden the shortest day has roughly 7 h 51 min of daylight and the longest about 16 h 37 min. The noon sun sits near 15° above the horizon in winter and 62° in summer — so glass that faces south collects useful warmth from October to March, while a west-facing door may need solar control to stop it overheating in July.
How much do external pocket sliding doors cost in Morden?
These figures are for the door supplied and fitted, with the engineer's structural calculations, including VAT. They include forming the opening and the pocket in the wall; Building Control fees are set by your council and are extra. Your price is fixed in a written quote after survey.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.4 m | 2 panels | £7,495–£9,195 |
| 3.0 m | 2 panels | £8,395–£10,295 |
| 3.6 m | 2 panels | £9,295–£11,395 |
See every size on the external pocket sliding doors page or try the guide price tool.
From survey to fitted door in Morden
A surveyor visits your Morden home to check the wall, the structure above and the floor levels, and talks through glass and finish. Any building work is planned to the engineer's design, the door is made to the finished opening sizes — typically 6–8 weeks from survey sign-off — and fitting usually takes 3–5 days of building work to form the opening and pocket, then 1–2 days to fit the door.
Do you need approval in Morden?
A new or wider opening in England needs Building Control approval for the structural work as well as compliance for the door itself under Approved Documents L and K. Expect structural calculations, a steel beam and, where a party wall is involved, notices under the Party Wall etc. Act 1996.
Finishes and extras for external pocket sliding doors
- Threshold. Low or flush thresholds, with the external drainage channel continuing past the pocket.
- System type. Standard aluminium, slimline or lift and slide pocket systems, chosen to suit panel weight and sightlines.
- Glass. Double or triple glazed safety glass, with laminated or solar-control units as needed.
Questions about external pocket sliding doors in Morden
Do I need building approval for external pocket sliding doors in Morden?
In England a replacement door is a controlled fitting, so compliance is arranged through a competent person scheme installer or Building Control; new openings need a Building Regulations application. We confirm the right route for your property at survey, so the paperwork is in place before fitting.
How much wall do I need for an external pocket door?
An external pocket door needs a clear length of wall beside the opening at least as long as the panels that slide into it, plus a little for the frame. For a single 2 m panel that means just over 2 m of wall with no windows, radiators, sockets or pipes in it. A two-sided pocket splits the panels between both sides, so each side needs less length.
How wide can an external pocket sliding door be?
An external pocket sliding door in our range typically gives a clear opening of about 1.8 m to 6 m, using one panel at the narrow end and two or three panels on wider doors. Wider openings usually use pockets on both sides, or a multi-track pocket so the panels stack inside the wall. Sizes are confirmed after survey and the engineer's design.
Do external pocket doors need Building Regulations approval?
External pocket doors need Building Regulations approval in England, because forming the opening and pocket is structural work needing an application, structural calculations (included in our guide prices), and usually a steel beam or lintel. If the steel bears on a party wall, the Party Wall etc. Act 1996 (England and Wales) may apply. Scotland needs a building warrant; Wales and Northern Ireland have their own building control rules.