- Postcode district
- EX17
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Exeter, Tiverton, Okehampton
- Building rules
- England
Are slimline sliding doors right for your Crediton home?
These are the points a surveyor will go through with you when you choose slimline sliding doors for a home in Crediton:
Where the plans for a Crediton project show a wide glazed rear wall, the structural engineer should know the panel weights early so the steel can be sized for them.
Is the patio behind your Crediton home level with the floor inside? If so, a flush threshold with an outside drainage channel can make the two read as one surface.
- A flush threshold, paired with a drainage channel outside, lets the inside floor run straight out to the terrace without a visible step.
- Multi-point locking is concealed within the slim interlock and frame, keeping hardware out of sight while still engaging several points when the door closes.
- High-load stainless steel rollers are sized for big glass units, so a panel weighing well over a hundred kilograms can still glide with a light push.
Daylight in Crediton and what it means for your glass
Because Crediton sees long summer days (about 16 h 30 min) and short winter ones (about 7 h 57 min), the elevation your door faces makes a real difference. With the midday sun at about 16° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Typical costs for slimline sliding doors around Crediton
Guide prices are the same across Devon: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £5,095–£6,195 |
| 3.6 m | 2 panels | £7,795–£9,495 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the slimline sliding doors page or try the guide price tool.
How fitting works in Crediton
Once the opening is measured, nothing is ordered until you sign off the specification. Lead time is typically 6–8 weeks from survey sign-off. Our fitters protect floors, remove the old door, install and seal the new one and leave the area clean — usually 1–2 days; allow 3–5 days of building work first if the opening is formed or widened for a door like this.
Do you need approval in Crediton?
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Which options matter for slimline sliding doors?
- Panel layout. Two panels with one or both sliding, or three and four panel layouts for wider openings.
- Glass. Double or triple glazed safety glass, with solar-control, low-iron or laminated units available.
- Colours. Black, anthracite grey, bronze-effect or a special RAL powder coat, with dual colour available.
Questions about slimline sliding doors in Crediton
Can you match other doors and windows in my Crediton home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What is the lead time for slimline sliding doors?
Slimline sliding doors typically take 6–8 weeks to manufacture after survey sign-off, because the profiles are precision-made and the glass units are large. Fitting typically takes 1–2 days. If the frame is being concealed in a new floor or ceiling, the recesses are formed during the building work, and a sub-frame may be set in place before the screed and plaster go on.
Do slimline sliding doors need structural work?
Slimline sliding doors need structural work only if the opening is being formed or widened, which is common with large panels. In England that is a Building Regulations application with structural calculations and usually a steel beam; the guide price for forming a 4 m opening is around £4,195, inc VAT, on top of the door. Scotland needs a building warrant, and Wales and Northern Ireland have their own rules.
Are slimline sliding doors less secure because the frames are thin?
Slimline sliding doors are not less secure simply because the frames are thin; security depends on the locking, the glass and how the panels are held in the track. Well-specified systems use multi-point locks concealed in the interlock, anti-lift features and laminated glass. Slimline systems are available tested to PAS 24, and laminated inner panes can be specified where security is a priority.