- Postcode district
- BA5
- Survey
- Free for new and replacement doors
- Typical lead time
- Typically 6–8 weeks from survey sign-off
- Guide price
- From £5,095 inc VAT
- Nearby
- Shepton Mallet, Glastonbury, Street
- Building rules
- England
Why choose slimline sliding doors in Wells?
Here is what to weigh up if you are considering slimline sliding doors for a home in Wells:
If the only route to the back of a Wells property is through the house or a narrow side passage, the survey plans how large slimline panels will be carried in safely.
Even on a straight replacement in Wells, where the outer frame stays visible, the thin centre interlock of slimline sliding doors shows noticeably more glass than a standard slider.
- Panels of up to around 2.5–3 m wide mean a wide opening needs fewer sections, and so fewer interlocks crossing the view.
- Profiles stay just as narrow on tall panels as on standard-height ones, keeping the sightlines consistent from floor to ceiling.
- Multi-point locking is concealed within the slim interlock and frame, keeping hardware out of sight while still engaging several points when the door closes.
How much sun will a door in Wells get?
Because Wells sees long summer days (about 16 h 35 min) and short winter ones (about 7 h 52 min), the elevation your door faces makes a real difference. With the midday sun at about 15° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for slimline sliding doors in Wells
Guide prices are the same across Somerset: the fitted price depends on the size, system and specification, not your postcode. These figures are for a standard 2.1 m high door, fitted, including VAT and removal of an old door of similar size.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 2.1 m | 2 panels | £5,495–£6,795 |
| 4.8 m | 3 panels | £9,595–£11,695 |
| 6.0 m | 4 panels | £11,395–£13,895 |
See every size on the slimline sliding doors page or try the guide price tool.
Survey, manufacture and fitting around Wells
A surveyor visits your Wells home to measure the structural opening, check levels and the lintel, and talk through glass and finish. Once you confirm the written specification, the door is made to measure — typically 6–8 weeks from survey sign-off — and fitting usually takes 1–2 days; allow 3–5 days of building work first if the opening is formed or widened. We also cover Shepton Mallet (7 km east) and Glastonbury (8 km south-west).
Rules for slimline sliding doors in England
In England, a replacement sliding door is a controlled fitting under the Building Regulations. In an existing home, a door with more than 60% glazing must reach a U-value of 1.4 W/m²K or better (or a Doorset Energy Rating of band C) under Approved Document L, and glass in doors must be safety glazing under Approved Document K. We arrange compliance through a competent person scheme installer or by notifying Building Control, and you receive the certificate.
Finishes and extras for slimline sliding doors
- Glass. Double or triple glazed safety glass, with solar-control, low-iron or laminated units available.
- Panel layout. Two panels with one or both sliding, or three and four panel layouts for wider openings.
- Colours. Black, anthracite grey, bronze-effect or a special RAL powder coat, with dual colour available.
Questions about slimline sliding doors in Wells
Can you match other doors and windows in my Wells home?
Usually, yes. Most aluminium and uPVC systems come in standard RAL colours and finishes, and we can quote dual colour where the inside and outside need to differ. Bring photos of existing frames to the survey.
What is the lead time for slimline sliding doors?
Slimline sliding doors typically take 6–8 weeks to manufacture after survey sign-off, because the profiles are precision-made and the glass units are large. Fitting typically takes 1–2 days. If the frame is being concealed in a new floor or ceiling, the recesses are formed during the building work, and a sub-frame may be set in place before the screed and plaster go on.
Do slimline sliding doors need structural work?
Slimline sliding doors need structural work only if the opening is being formed or widened, which is common with large panels. In England that is a Building Regulations application with structural calculations and usually a steel beam; the guide price for forming a 4 m opening is around £4,195, inc VAT, on top of the door. Scotland needs a building warrant, and Wales and Northern Ireland have their own rules.
How much do slimline sliding doors cost?
Slimline sliding doors start from a guide price of £5,095 for a 1.8 m two-panel door, fitted, inc VAT, at standard 2.1 m height. A 2.4 m door is a guide £5,995–£7,295, and a 4.8 m three-panel door is around £9,595. Concealed frames, triple glazing and flush thresholds add to the figure, and the final price is fixed in a written quote after survey.