- Postcode district
- BT75
- Survey
- Free, area covered by arrangement
- Typical lead time
- Typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off
- Guide price
- From £1,995 inc VAT
- Nearby
- Lisnaskea, Enniskillen, Irvinestown
- Building rules
- Northern Ireland
Is a tilt and slide door a good fit for your home in Fivemiletown?
Here is what to weigh up if you are considering tilt and slide doors for a home in Fivemiletown:
Is the opening in your Fivemiletown home wider than about 3 m? If so, tilt and slide hardware will not carry a sash that size, and a lift and slide door is worth comparing.
A kitchen in Fivemiletown that steams up while you cook can be aired by tilting the sash, which is quicker than reaching across the worktop to a window.
- A tilt and slide door fits the same kind of opening as an ordinary patio door, so a draughty older slider can often be swapped without building work.
- Locking points engage around the whole perimeter of the sash, much like a window, rather than only along the closing edge.
- The sash moves forward and slides parallel in front of the fixed pane, so nothing swings into the room and the floor beside the door stays usable.
Light and sun in Fivemiletown
Because Fivemiletown sees long summer days (about 17 h 14 min) and short winter ones (about 7 h 18 min), the elevation your door faces makes a real difference. With the midday sun at about 12° in winter, a south-facing door brings light well into the room; a west-facing door catches hot late-afternoon sun in summer.
Guide prices for tilt and slide doors in Fivemiletown
Pricing is transparent and does not change because you are in Fivemiletown. The ranges below cover a standard-height door, fitted, with VAT; options are itemised in your quote.
| Overall width | Typical panels | Guide price (fitted, inc VAT) |
|---|---|---|
| 1.8 m | 2 panels | £2,195–£2,695 |
| 2.1 m | 2 panels | £2,395–£2,895 |
| 2.4 m | 2 panels | £2,595–£3,195 |
See every size on the tilt and slide doors page or try the guide price tool.
How fitting works in Fivemiletown
We plan the job around your home in Fivemiletown: survey first, then a written quote, then manufacture (typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off). The fitting itself usually takes 1 day for a straight swap in an existing opening. If you are in Lisnaskea or Enniskillen, the same process and prices apply. Fivemiletown is in an area we cover by arrangement: the survey is still free, and survey dates, delivery and any travel cost for delivery and fitting are confirmed in your quote before you order.
Do you need approval in Fivemiletown?
In Northern Ireland, the Building Regulations (Northern Ireland) apply through your district council's building control service, with energy guidance in Technical Booklet F1. Work in Northern Ireland is by arrangement, and we confirm the approval route for your property at survey.
Options to consider for your tilt and slide door
- Material. uPVC for a lower price and shorter lead time, or aluminium for slimmer frames and powder-coated colours.
- Handle. An inside lever handle with a key lock, plus an outside pull handle or cylinder if the door is used from the garden.
- Restrictor. A sliding restrictor on many systems to limit the opening for upstairs rooms or homes with young children.
Questions about tilt and slide doors in Fivemiletown
How soon can you survey in Fivemiletown?
Survey dates in the BT75 district are arranged individually when we reply to your enquiry. After you approve the written quote, manufacture is typically 2–4 weeks for uPVC or 4–6 weeks for aluminium, from survey sign-off.
What is a tilt and slide door?
A tilt and slide door is a patio door whose opening sash can either tilt inward at the top for ventilation, or move forward and slide parallel across the fixed panel. The handle selects the mode. When closed, the sash is pulled back into the frame and sealed on all four sides, so it behaves more like a large window than a conventional slider.
How wide can a tilt and slide door be?
A tilt and slide door in our range is typically about 1.5 m to 3 m wide overall, with one opening sash and one fixed panel. The sash size is set by the hardware's weight limit, which is lower than for inline or lift and slide systems. If you need a wider opening, a standard aluminium slider or a lift and slide door is the usual alternative.
How long does a tilt and slide door take?
A tilt and slide door typically takes 2–4 weeks to make in uPVC and 4–6 weeks in aluminium, from survey sign-off. Fitting typically takes 1 day for a straight swap in an existing opening, including removing the old door and making good. These are typical times rather than fixed promises, and the date is confirmed once the order is placed.